Awesome International Standards Blog? Tip#53

Ljubitelji filma i televizije, izvolite.
Postovi: 28
Pridružen/a: 16 lip 2021, 21:16
Lokacija: UK

Awesome International Standards Blog? Tip#53

Post Postao/la FrankJScott » 22 lip 2021, 19:46

International Standards For Mechanical Properties And Industrial Substances B
NOTE b: Factory like conditions provide shelter from direct weathering and grime, prevent undue movement of the joints during curing of the adhesive and provide temperature and relative humidity requirements and control as in mill manufacturing environment. This document also covers glued-in sticks in surface treated timber. It doesn't cover glued-in sticks in modified and laminated timber with substantially reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood, polymer impregnated timber and preservative treated timber. The joints are meant for load-bearing wood structures in service classes 2 and 1 according to EN 1995-1-1 which are loaded predominantly static or quasi static according to EN 1990 and EN 1991-1-1. The joints are intended for load-bearing timber structures which aren't exposed to a prolonged exposure to temperatures around 60 °C. A thorough determination of the areas in which this standard may be used will allow you to know whether it matches with the technical base of your company. In case you have any questions regarding defining the gear and procedures described within this record, you can speak to a company of experts in the subject of selection of international criteria, who will offer advice and select the right standard.

Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
We've already mentioned more than once the significance of test methods for constructing a productively functioning system. This phase is carried out in virtually every area of manufacturing activity. Another important standard governing test procedures and the requirements for them is EN 17418: 2021. This document defines test methods and requirements for two-component epoxy and polyurethane adhesives for on-site repair of cracks in wood structures made of strength graded structural timber with rectangular cross-section, structural finger-jointed wood, glued solid wood and glued laminated timber made from softwood species by injection of this repair adhesive with adhesive line thicknesses around 2 mm.

The adhesive may also be used to rehabilitate cracks in the region of joints made from screws, nails, dowel-type attachments and dowels with threads. This document addresses exclusively adhesives which satisfy the requirements according to Clause 8. The adhesive is intended for the treatment of load bearing timber structures not exposed to temperatures over 60 °C over a more extended time in service classes 1 and 2 according to EN 1995-1-1 which are loaded mostly static or non-fatigue quasi static, watch EN 1990 and EN 1991-1-1.

If you are interested in purchasing this regular, or comparable criteria of a related business, we advise that you follow the link to the site and get accustomed to the entire list of available records. Maybe this is where you'll see standards that will go a long way towards structuring your organization's system.

Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
In today's world, the use of plastic is considerably minimized, as it negatively affects environmental aspects. Regardless, it's for this reason that an increasing number of regulatory functions are being created to regulate activities that come into contact with this substance, among which will be EN ISO 6721-3: 2021. This document defines a bending-vibration method based upon design curves for determining the flexural complex modulus of homogeneous plastics and the damping properties of laminated plastics meant for acoustic insulation, for example systems comprising a metallic sheet coated with a damping plastic layer, or dishwashing systems consisting of two sheet-metal layers using an intermediate plastic coating. For many functions, it's beneficial to determine these properties as a function of frequency and temperature.

If your activities directly or indirectly come into contact with the mentioned types of materials and equipment, we strongly advise you have this standard accessible in order to make sure that your company's system functions in compliance with the latest needs of global worldwide markets. This is what will keep you at the forefront of the business.

The importance of getting international standards in a business
At first glance, the existence of global standards may look as a requirement only for local companies and manufacturers. Nonetheless, the vector of development of local markets is shifting increasingly more towards globalization, which is why by preparing the earth beforehand for entering the global level, it's likely to substantially strengthen the position of a business's competitiveness. That is why we are always happy to help you to pick international documents that are suitable for your company or organization.